SABEU develops and produces membranes used in our vents and vented closures. They offer crucial advantages for the packaging of gas emitting materials.
FLUXX® packaging vents are equipped with PTFE membranes, which allow for continuous pressure equalization, while preventing pressure build-up and suppression of containers. The patented FLUXX® drip-off edge allows fluids to drain immediately after coming into contact with the membrane, keeping the membrane unobstructed and permeable to air.
Based on their configuration and structural design, the FLUXX® packaging vents meet all the requirements for the approval with suitable containers set forth in the UN test specifications, ADR, and the BAM [German Federal Institute for Materials Research and Testing] dangerous goods regulation, BAM-GGR 005.
|Diameter||15 mm||17 mm||38 mm|
|h1||7,5 mm||15,0 mm||22,0 mm|
|h2||6,0 mm||6,0 mm||12,0 +/- 0,2 mm|
|d||13,0 +/- 0,1 mm||13,0 +/- 0,1 mm||13,0 +/- 0,1 mm|
|Water entry pressure||0,69 bar||0,69 bar||0,69 bar|
|Typical airflow||5,0 l/h at 12 mbar||5,0 l/h at 12 mbar||70 l/h at 12 mbar|
|Typical applications||2-60 liters||2-60 liters||60-1.500 liters|